what can you attach ti chain fence to provide privacyoff

Download Article

Download Article

Chain link fences are pop boundary markers, but they leave a lot of space for prying eyes. Fortunately, you have a few means to block outside views. Bamboo fences serve as cheap ways to create alpine barriers, or you can build your own wooden slats. If you enjoy gardening, consider planting bushes in forepart of the fence for a natural barrier that will successfully give your yard the privacy you desire.

1. 1

   Purchase a bamboo fence. Bamboo fences can be purchased online or at some home comeback stores. They come in rolls that you spread out across your fence. It's a much cheaper, more efficient solution than buying lots of slats or replacing your entire fence.

   • Bamboo rolls can toll anywhere from $20 to $100 USD.

2. 2

   Put a plank on the footing in front of the argue. Pick up a lath from the home improvement shop, about 2 in × eight in (5.i cm × 20.iii cm) in length. Lay it at ane stop of the concatenation link fence. Utilize the board to prop up the bamboo fence as you piece of work.^[1]

   • The board provides a level surface for the bamboo while also lifting information technology off of moist soil.

   Ad

3. three

   Roll the bamboo along the fence. Stand up the bamboo whorl vertically on the board, upwards confronting the fence. Hold the roll steady as y'all brainstorm rolling it to the side. Whorl it as far as yous possibly can while holding it upright.^[2]

   • Piece of work slowly. Tie the argue in place earlier moving the board and so you are able to go along the fence steady.

4. 4

   Identify wire ties every 12 in (30 cm) across the top runway. Start at the chain link fence's cease post. Wrap the tie around the bamboo, sliding the ends through it and towards the fence rail. Wrap the ends around the rail to hold the bamboo in place.^[3]

   • You can purchase packs of concatenation link wire ties or get 1 ft (0.30 m) galvanized wire from a domicile comeback eye.
   • Y'all may likewise apply zip ties. These are fabricated of plastic, so they may be less sturdy just easier to attach than metal wires.

5. 5

   Twist and clip the wires to secure the bamboo to the argue. On the other side of the fence, twist the ends of the wire together by hand. You will demand a wire cutter to trim off the excess. Then, utilize a pair of pliers to twist the ends as tight as you can make them.^[4]

6. half-dozen

   Place a 2nd row of wire ties at the bottom of the fence. Place the second row of wire ties about 1 ft (0.thirty 1000) off the ground. Each tie should be placed directly below a necktie from the first row. Space the ties 12 in (30 cm) autonomously once again.^[5]

   • Necktie the ties in place the same way as you did before. This will secure the bottom of the bamboo to your chain link fence.

7. 7

   Repeat unrolling and tying the bamboo to install it. One time you are able, slide the lath along the argue. Continue using it as a base to scroll out and lift the bamboo. Continue doing this until you are able to tie the bamboo to the other finish of your fence.

   • If y'all covering a long contend, you may demand multiple bamboo rolls.

   Advertisement

1. 1

   Mensurate the length, width, and height of your growing infinite. Measuring your space in advance tin assist you effigy out what kind of establish is right for you. Run tape measure along the fence, and besides note how much space is between the fence and any nearby structures. Measure the fence'due south height to figure out how tall the plants demand to be.^[6]

   • Bushes typically range from $15 to $threescore apiece.
   • Bushes, copse, and shrubs are a natural "privacy screen" but they crave weekly maintenance and can take a few years to grow to full size.
   • Y'all tin also abound vines similarly to how you lot grow bushes or copse.

2. ii

   Option a blazon of tree suitable to your growing location. The type of plant y'all pick depends upon your needs as well as where yous live. Choose a constitute based on the temperature in your region. Also consider if you need a establish that survives well in sunlight, dryer soil, or keeps its color yr-round.^[seven]

   • For example, y'all can cull an Arborvitae. These hedges are evergreens that can abound tall in front of loftier fences.
   • Deciduous bushes like North privet and Rose of Sharon lose their leaves in the winter, and then you don't become yr-round coverage.

3. 3

   Infinite the planting spots evenly along the fence. Mark each planting spot with a wooden pale. The altitude between each spot depends on how much space your chosen institute needs to grow. If you leave enough space, your plants will obscure the contend once they attain full size.^[eight]

   • For example, await to leave half-dozen to 8 in (xv to xx cm) between trees and 3 to 4 in (seven.vi to x.2 cm) between each shrub.
   • Yous tin can also run a string from stake to stake to ensure you plant in a straight line.

4. 4

   Dig a hole as deep and 3 times as wide equally the root ball. If your plant is in a container, dig the hole equally deep as the container. Yous tin place the container in the ground to bank check the pigsty's depth. So, widen the hole appropriately and so the plant has plenty of room to spread its roots.^[nine]

   • Avert planting containers in the ground. Copse and shrubs need to be taken out of the container earlier planting and so the roots tin can spread.
   • If you lot are placing a bunch of plants with bare roots, you can dig a trench forth the fence to make this easier.

5. 5

   Center the plant in the hole and bury the roots. Set a plant at each pale you placed before. Position the plants in the center of the hole, so begin refilling the hole until the soil is above the constitute's root crown. The root crown is the spot where the roots connect to the body. And then, gently press down on the soil with your human foot to eliminate air pockets.^[ten]

   • You practise not demand to put any compost or other additives into the soil at this time. Compost can be spread over the soil afterward the first twelvemonth.

6. six

   Spread pine mulch around the growing area. Get an organic mulch such as pine bark or pine needles from a home improvement middle. Spread the mulch in a layer 2 to 3 in (5.1 to 7.6 cm) thick. The mulch is useful for protecting your plant from harsh weather and keeping the soil moist.

   • Spread the mulch along the diameter of the hole you dug earlier. Likewise, avert letting the mulch touch the establish'due south trunk.

7. vii

   Water the found immediately and repeat watering one time a week. Thoroughly water the ground immediately by spraying it with a hose. The soil should be moist all the mode down to the root brawl. Spray the footing instead of the institute to avoid root rot.^[11]

   • To water trees and bushes regularly, place a garden hose nearby and let water drip into the soil for 30 minutes.
   • You can bank check the soil's moistness by sticking a pole into the ground. Information technology should slide into the soil without resistance.

8. eight

   Trim shrubs and bushes a few times a yr. Your plants will need maintenance in spring and autumn, at the very to the lowest degree. Get a good pair of gardening clippers. Trim the plant evenly forth the summit and sides, keeping the superlative wider than the base then light filters down to the lower branches.^[12]

   • Trimming shrubs and bushes forces them to grow upwards and keeps them looking neat.
   • For trees like juniper and cedar, you are meliorate off letting the branches grow naturally. Prune excessive branches equally needed.

   Advertisement

1. 1

   Cut forest into boards to create the slats. Y'all will need 2 cedar boards that are half dozen ft (i.8 k) long and 1 in × 3 in (two.v cm × 7.6 cm) in size. Yous also need 12 cedar planks that are half dozen ft (ane.8 m) long. You lot can order the woods at a home improvement shop and the employees may be able to cut the wood for you.^[13]

   • Building slats may price you around $50, although this tin be college depending on the supplies you need.
   • Depending on the size of your fence, you may need to suit the size of the boards.
   • If you cutting the wood yourself, take proper precautions by wearing goggles and a respirator.
   • You tin as well purchase slats from a home improvement store, but they can go expensive.

2. 2

   Connect the smaller boards to 1 plank. Choose one of the cedar planks to be the superlative of your privacy panels and lay information technology horizontally on the ground. Lay the 2 smaller boards vertically over the plank. Position each lath and then it is 4 in (10 cm) from the plank's ends.^[14]

   • The smaller boards will connect to the fence and concur the slats in place.

3. three

   Boom the slat to the side boards. Flip the boards carefully so the plank is on top of the side boards. Square up the boards, making sure they are aligned with the meridian of the slat. Then, hammer a 1.v in (3.viii cm) steel stop boom through the slat and into each side lath.^[fifteen]

   • Make certain the side boards are level, or else the slats will not hang straight on your debate.

4. iv

   Identify the lesser plank on the side boards. Echo the process past selecting another plank to be the bottom slat. This time, position it and then information technology is ^ane⁄₄  in (0.64 cm) above the free terminate of the side boards. Use two more nails to secure the slat to the boards.^[16]

   • The bottom slat needs to be higher than the ends of the side boards so it doesn't hang in moisture soil.

5. v

   Space the remainder of the boards evenly and nail them in place. The remaining cedar planks form the rest of the console. Measure the infinite between the top and bottom slat. Position the other cedar planks between them. When you're sure they're square, nail them in place.^[17]

   • Make sure the edges of the slats are aligned. Y'all don't desire some of the slats to stick out further than the others.

6. 6

   Tie the panel to your contend with rope. Lift the panel off the footing, placing information technology where yous desire information technology to hang across your debate. Then, use pieces of rope or bungee cords to secure the panel to the peak track of your chain link contend. Use more than pieces to secure the console'south bottom terminate to the fence too.^[18]

   • Adjust the console so information technology is every bit tight confronting the fence every bit possible. If it isn't straight, your next measurements may be inaccurate.

7. 7

   Marker the spots where the pipe rail tie will fit on the side boards. The pipe rail ties are what you apply to secure the panel to the chain link fence. They rest on the side boards and connect to your fence'south height runway. You tin agree the pipe ties against the boards to get an thought of how they will line upwardly. Using a pencil, mark the spots where the bolts will laissez passer through the boards and into the ties.^[xix]

   • You lot can purchase the pipe ties at a dwelling house improvement store. Yous need 2 of them for your panel.

8. 8

   Drill holes in the spots you marked before. Undo the rope or bungee cords holding your panel in place. Lower the panel to the ground. Using an electric drill and a ^ane⁄_four  in (0.64 cm) drill bit, drill all the way through the side boards and panels.^[20]

   • Each pipe tie connects to the boards in 2 spots, so you will need to drill a total of iv holes.
   • Wear safety gloves, goggles, and other protective wearable while operating a drill.

9. 9

   Bolt the the pipe ties to the panel and fence. Position the pipe ties on the side boards over again. Fasten the top ends with 2 in (v.1 cm) bolts. Enhance the console, sliding the ties over the chain link fence'southward top runway, and so secure the bottom ends with another pair of bolts.^[21]

   • Twist a washer and nut onto each commodities to ensure the panels stay in identify.
   • If you have a long fence, repeat the process to create more panels you lot can hang.

   Advertisement

Add New Question

• Question

  What other options practise I take?

  

  Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman Boston. With over 15 years of feel, Ryaan specializes in dwelling improvement and holding maintenance past leveraging technology and adroitness. Ryaan holds his Construction Supervisor and Home Improvement Contractor Licenses. Unlike well-nigh handyman contractors, Best Handyman Boston is licensed and insured. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston.

  

  Home Improvement Specialist

  Expert Answer

  

  Support wikiHow by unlocking this expert answer.

  You tin call a argue company and accept them come up put a bunch of slats in the fence for you. You lot could also do some feature forest on there. Another pick is taking some nice lattice work and goose egg tying it to the debate. Then you could stain or paint it.

Ask a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advertizement

• If y'all have well-draining soil, you can grow bushes. Choose a type of plant that grows well in your region.

• Making your own slats is unremarkably cheaper than buying them at store.

• Custom-made wood privacy fences are easy to repair, since all you have to do is detach damaged slats.

• You can stain wood panels to make information technology last longer outdoors and paint it for decoration.

Advertisement

• Some areas have government regulations stipulating how you tin decorate your fence. Read these to avert any issues.

• Power tools can be dangerous, so always wear goggles and other safety gear while operating them.

Advert

Things Y'all'll Need

• Bamboo argue rolls
• Wooden lath
• Wire ties
• Wire cutters
• Pliers

• Plants
• Shovel
• Hose
• Organic mulch
• Gardening shears
• Gardening gloves
• Wooden stakes
• String
• Measuring tape

• 2 cedar boards 1 in × three in (2.v cm × seven.vi cm) and 6 ft (i.viii k) long.
• 12 cedar planks 6 ft (one.8 m) long
• 2 one ⁵⁄_eight  in (four.1 cm) metallic pipe ties
• 50 1.5 in (iii.eight cm) steel finish nails
• four ii in (5.i cm) bolts
• 4 nuts and flat washers
• Drill
• ¹⁄₄  in (0.64 cm) drill bit
• Hammer
• Square ruler
• Pencil
• Rope or bungee cord

About This Article

Commodity Summary X

Concatenation-link fences don't give you much privacy, simply there are some unproblematic means you can forestall prying eyes from peaking into your garden. You lot could try planting evergreen shrubs or bushes, such as arborvitae, along the fence. These plants won't lose their leaves in winter, which means you'll get year round coverage. Alternatively, purchase a bamboo fence from a gardening store or online. Y'all can install the bamboo by attaching information technology to the height and lesser of your chain-link fence with wire ties. If yous're feeling more aggressive, try making a wooden-slatted privacy panel. You'll need to cut planks of forest to size and nail them together. Then, attach your panel to the fence with piping rails ties. For tips on how to cut the wood for your privacy panel, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 268,589 times.

Did this article help you?

robinsonabouty.blogspot.com

Source: https://www.wikihow.com/Add-Privacy-to-a-Chain-Link-Fence

Share this post